pocahontas

Project: pocahontsbarco.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 3.1mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Smart Recycled Blue Transmission Distance: 2.2 PLA Smart Recycled Green Transmission Distance: 6.5 PLA Smart Recycled Red Transmission Distance: 4.4 PLA Kingroon White Transmission Distance: 5.8 PLA PolyLite Grey Transmission Distance: 1 PLA Kingroon Brown Transmission Distance: 2.7 PLA Smart Recycled Orange Transmission Distance: 5.7 PLA Smart Recycled Yellow Transmission Distance: 9.3This print uses 9 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #9 (0.8mm) swap to Green At layer #12 (1.04mm) swap to Blue At layer #13 (1.12mm) swap to Red At layer #16 (1.36mm) swap to White At layer #19 (1.6mm) swap to Grey At layer #20 (1.