Pocket phone stand

This is a portable mobile phone stand, the size is only 40mm×75mm×8mm, the length is smaller than the width of the phone, with seven-speed adjustment, there are two versions with and without the logo.（这是一个的便携手机支架，尺寸仅为40mm×75mm×8mm，长度比手机宽度还小，带有七挡调节，有带标志和不带标志两种版本）Print instructions:Print 1.stl, 2.stl, 3.stl (without logo) three files;Or print 1.stl, 2.stl, 3logo.stl (with logo) three files.When carrying a phone holder, the pocket may be squeezed, and installation also requires toughness. It is recommended to use PETG printing.（打印说明：打印1.stl，2.stl，3.stl（不带logo）三个文件；或者打印1.stl，2.stl，3logo.stl（带logo）三个文件。）携带手机支架时口袋会挤压，安装也需要韧性，推荐使用PETG打印。Assembly instructions:1. Put the bottom side of 2.stl up, insert one protrusion into the small hole of 1.STL, and then push the other protrusion of 2.stl into the small hole of the other side of 1.STL.（组装说明：1.将2.stl底面朝上，一侧突出部插入1.stl的小孔，再将2.stl另一侧突出部推入1.stl另一侧的小孔。）2. Insert the bottom of 3.stl (3logo.stl) with one side protrusion into the large hole of 1.stl, t