Thingiverse
Pocket Safe 2
par MikleVV
3
Téléchargements
3
Likes
0
Makes
This is a remake of a really working design https://www.thingiverse.com/thing:2985237
To improve the convenience of operation and reliability of the mechanism, the following changes have been made:
the printed pins on the shafts broke off. Shafts converted to steel rod. A nail with a diameter of 1.2 mm is used as a rod. It must be melted into the allotted place and then shortened.
Extended handle for ease of use
the scale with numbers is printed separately and glued onto the existing scale.
an enlarged case has been made that can accommodate several flash drives.
To improve the convenience of operation and reliability of the mechanism, the following changes have been made:
the printed pins on the shafts broke off. Shafts converted to steel rod. A nail with a diameter of 1.2 mm is used as a rod. It must be melted into the allotted place and then shortened.
Extended handle for ease of use
the scale with numbers is printed separately and glued onto the existing scale.
an enlarged case has been made that can accommodate several flash drives.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
