Thingiverse
PocketDriver - EDC Hex Bit Screwdriver w/ Storage
par DownloadedGoods
334
Téléchargements
730
Likes
3
Makes
The PocketDriver is a sleek and practical EDC bit driver designed to hold up to 4 bits within its body.
It comes in 2 versions, a Large (can carry up to 4 bits) and a Medium (can carry up to 3 bits). Printing it is super easy, just make sure to print it standing up with a good brim and good bed adhesion so that the body doesn't fall mid-print.
At the base of the bit socket, there's room to affix a 6x2mm round magnet (a 5x1mm magnet also works). The model features 0.3mm tolerances for the bits, though depending on your printer and material, it may be slightly snug. If needed, using pliers to insert and remove bits a few times can help loosen the slot.
Happy printing!
It comes in 2 versions, a Large (can carry up to 4 bits) and a Medium (can carry up to 3 bits). Printing it is super easy, just make sure to print it standing up with a good brim and good bed adhesion so that the body doesn't fall mid-print.
At the base of the bit socket, there's room to affix a 6x2mm round magnet (a 5x1mm magnet also works). The model features 0.3mm tolerances for the bits, though depending on your printer and material, it may be slightly snug. If needed, using pliers to insert and remove bits a few times can help loosen the slot.
Happy printing!
DownloadedGoods publie également sur
42 modèles supplémentaires sur 1 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
