Thingiverse
Podmic Shock Mount
door Brandor
1
Downloads
0
Likes
0
Makes
Update 1 : fixed screw hole (I think lol)
Wanted a shock mount for my Podmic as the mic does not have a great internal shock mount, so I created a mount to fit a aftermarket mic mount that was for the Blue Yeti, etc. The outer ring was purchased from amazon with is link.
https://www.amazon.com/gp/product/B073Z9NF3Y/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I would recommend more infill for the main body as when I was tightening the screw the layers wanted to sperate and cracked, as for the 2 screws i would just print then with 100% infill. Printed the main body at 102% and the 2 screws at 97-95% size.
SCALE DOWN SCREWS TO FIT MAKE SURE THREADS ARE CLEAN
Take apart the original podmic arm off to mount this print.
Wanted a shock mount for my Podmic as the mic does not have a great internal shock mount, so I created a mount to fit a aftermarket mic mount that was for the Blue Yeti, etc. The outer ring was purchased from amazon with is link.
https://www.amazon.com/gp/product/B073Z9NF3Y/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I would recommend more infill for the main body as when I was tightening the screw the layers wanted to sperate and cracked, as for the 2 screws i would just print then with 100% infill. Printed the main body at 102% and the 2 screws at 97-95% size.
SCALE DOWN SCREWS TO FIT MAKE SURE THREADS ARE CLEAN
Take apart the original podmic arm off to mount this print.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!