pokeball hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA PolyLite Steel Grey Transmission Distance: 1 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filaments Start with Black At layer #12 (1.04mm) swap to Red At layer #16 (1.36mm) swap to Steel Grey At layer #19 (1.6mm) swap to Ivory White for the rest. commencer par le noir à la couche #12 (1.04mm) changer pour le rouge à la couche #16 (1.36mm) changer pour le gris à la couche #19 (1.6mm) changer pour le blanc pour le reste