Pokemon Blastoise Tag Bolt

Project: Blastoise Tag Bolt Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200.23mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA+ Sunlu White Transmission Distance: 5 PLA BambuLab Basic Beige Transmission Distance: 8 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #16 (1.36mm) swap to Ice Blue At layer #22 (1.84mm) swap to White At layer #23 (1.92mm) swap to Beige for the rest.