Pokemon Gengar hueforge

Gengar HueForge 4 ColorPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 137.71x219.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Tough Lavender Blue Transmission Distance: 2 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Lavender Blue At layer #12 (0.96mm) swap to Red At layer #17 (1.44mm) swap to Jade White for the rest.