Thingiverse
Pololu Gearmotor Bracket
di A_Dauntless
0
Download
0
Likes
0
Makes
⚠️Files Moved To [Printables](https://www.printables.com/social/245752/models)⚠️
====================
All future updates to this model will be posted [here](https://www.printables.com/model/221757).
---------------------
This is a mounting bracket for [these Pololu gearmotors.](https://www.pololu.com/product/1125)
The motors press fit into the bracket, and then the bracket press fits into 1/8" laser cut plywood for your project. From there, a zip tie ensures it isn't going anywhere.
It is important that the legs are shorter than the thickness of your material, else the zip tie won't secure the bracket. There is a second model with half-length legs for thinner materials.
The mounting holes for the legs are 6.35mm square, and sit 25.4mm apart. They should sit 1.6mm from the edge of your material.
====================
All future updates to this model will be posted [here](https://www.printables.com/model/221757).
---------------------
This is a mounting bracket for [these Pololu gearmotors.](https://www.pololu.com/product/1125)
The motors press fit into the bracket, and then the bracket press fits into 1/8" laser cut plywood for your project. From there, a zip tie ensures it isn't going anywhere.
It is important that the legs are shorter than the thickness of your material, else the zip tie won't secure the bracket. There is a second model with half-length legs for thinner materials.
The mounting holes for the legs are 6.35mm square, and sit 25.4mm apart. They should sit 1.6mm from the edge of your material.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
