Polydryer - Quiet Fan Modification

DISCLAIMER: PERFORM MODIFICATION AT YOUR OWN RISK.PARTS LISTNoctua NF-A4x10 24V PWMhttps://www.amazon.com/dp/B0CN39MCPL?ref=ppx_yo2ov_dt_b_fed_asin_titleQTY: 2 M3 Heat-Set InsertsHoles size in the Noctua fan are 4.5mm in diameter. I purchased these from McMaster but they are Dodge Ultraset II Inserts.https://www.mcmaster.com/94180A331/QTY: 4 M3x30mm Button Head ScrewsQTY: 4 JST 2.54mm 3-Pin Female ConnectorYou can re-use the existing harness but requires you to cut and splice into it.QTY: 1 High Density Foam Tape (Optional)INSTRUCTIONSRemove the QTY: 4 screws to separate the top and bottom housings of the PolydryerRemove the QTY: 4 screws holding the duct cover to the top housingInstall the new duct cover to the top housing using the QTY: 4 screws removed in the previous step. The duct can only be installed in one direction as the tabs prevent it from sitting flush if the orientation is incorrect.<l