Polymaker Logo Hueforge

Ive printed a few of these for my 3Dprint studio and now you can too! Enjoy Project: polymaker logo.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA PolyLite White Transmission Distance: 5 PLA PolyLite Polymaker Teal Transmission Distance: 0.5This print uses 2 unique filamentsSwap Instructions: Start with White At layer #10 (0.88mm) swap to Polymaker Teal for the rest.