Pool Strainer Fitting Low Profile

I wanted a lower profile strainer for my Intex Steel frame pool. Got tiered of hitting it all the time. The one i got with my filter and pump was 46mm "tall" on the inside of the pool.
I also wanted a way to connect a vacuum easily.

I designed this to be as low profile as i could get it, and still NOT be able to easily block it, the result is a two sided strainer, that even if blocked with an ass cheek or what ever on the top side, will still be able to suck water from the back side. This strainer only builds 21mm from the inside wall.

Thread Pattern on the outside is: (Fusion360): ISO Metric, 80,0mm, M80x2 class 6g, Right Hand.
Thread Pattern on the inside of the lid is the same as above but Press-Pulled 0,1mm to better fit when 3D printed.
The inside pipe is partially threaded for the vacuum connection fitting: ISO Metric, 27,0mm, M27x3, Class 6g, Right Hand.

So here are 3 parts, the strainer will most likely not fit the OEM parts o you need at least first 2 parts, Vacu