Pool suction cleaner attachment

For Intex above ground pools and similar. This nozzle connects via a flexible pipe to the filter pump port.
Before connecting the end of the hose to the port fill the pipe with water and remove the strainer. Push the tapered end into the port.
The filter pump draws water through the nozzle and into the filter inside the pump. The threaded pole part allows a paint roller pole to be attached so you can reach across the pool. Pickup any fine debris. If you have large debris remove it with a net before using this or the hose and pump may become clogged.
You should be cleaning the filter regularly anyway, but after cleaning would be a good time to flush the filter.

Print the nozzle with the threaded pole connetor vertical and bed only auto supports and the thread and nozzle will print OK.

I used these hoses https://www.amazon.co.uk/dp/B0C68M3DBH?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1
Pole https://www2.wickes.co.uk/Telescopic-Roller-Extension-Pole---1-to-2m/p/601608
I made a basic c