Poop Box (P1S)

Poop catcher that sits behind the P1S. ‘Backstop’ is short enough to avoid interfering with the spools and spool holder on the back. Dimensions are approximately 198mm x 80mm x 164mm (width x depth x height) and walls are 4mm thick. Print time was about 5h39m at 100% speed with 0.2mm layers. This is a larger print w/ PLA Basic. Filament needed is about 166.52 grams to 173.51 grams, depending on whether you use a 2-layer raft. I had some old, nearly-spent rolls I was trying to get rid of, so there you go… That explains the black rafts and lower layers before the green starts. Use of 2-layer raft and 60C bed temp highly recommended to avoid curling of bottom surface. Poop catcher that sits behind the P1S. ‘Backstop’ is short enough to avoid interfering with the spools and spool holder on the back. I included the mf file, the STEP file and the Solidworks (2023) file just in case you want to tweak it to decrease size / wall thickness / whatever to save some filament.