MakerOnline

Hobby&DIY

Pop tart case

by BenFriesen · Hobby&DIY

106 Downloads

36 Likes

0 Makes

Go to Model

Main case is printed normally with no supports, 0.4mm line width, may need to be printed slowly to minimize vibration of the spring. Lid is printed in vase mode with 0.8mm line width.

Category

Hobby&DIY

Source

MakerOnline

Published

29.09.2024

What you need to print this: Intermediate Medium confidence

Why?

no supports · large print

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Pop tart case?

Any FDM printer should handle Pop tart case just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Pop tart case need supports when printing?

No supports needed for Pop tart case — it's designed to print clean off the bed.

What file format is Pop tart case available in?

Pop tart case is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerOnline.

Is Pop tart case free to download?

Yes, Pop tart case is available as a free download through MakerOnline. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Pop tart case

Similar Models

Add to Collection