PopPlanter

# PopPlanter

Here is my simple self watering / hydroponic pot which uses the bottom from a 2L drinks bottle as I have been having problems getting my prints to come out truly watertight.

**Note:** The files here are sized with no clearance so that you can scale them to fit your required bottle size.

+ Measure your plastic bottle.
+ The STLs are sized for 100mm diameter bottles to make scaling easier.
+ Reservoir - Set the X and Y axis scale factor to match the outer diameter of your bottle. For example - for a 98mm diameter bottle you would set the scale to 98%
+ Pot - Set the X and Y axis scale factor to match the inner diameter of your bottle and allow a bit for clearance.

The pot is designed to use capillary matting as a wick and I have used this to great success to grow lettuce and other leaf crops.