Porsche 9PA Huforge

Project: Porsche9PAPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x133.33mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.4mmFilaments Used: PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA PolyLite White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Brown At layer #8 (0.72mm) swap to Yellow At layer #13 (1.12mm) swap to White for the rest. Bilder nach dem ersten druck Kommen nachgereicht.