portable soldering station

NOTE: the model is far from perfect, but it's good enough for me and I didn’t want to spend any more time on it. Feel free to modify the models using the STEP files to fit your needs.BOM2× wood panels 300×140×18 mm (you can vary the first dimension based on your needs, but if you make it smaller some things might not fit)1× 120 mm fan1× HEPA filter for Life V8 / V8s / X750 robotic vacuum (100×108×10 mm) (optional) (https://aliexpress.com/item/1005010449300087.html)1× PWM motor controller with potentiometer. To power it I used a USB PD trigger glued to the bottom of the wood panel, but you can use any 12 V supply. (https://aliexpress.com/item/1005010399069456.html) (different models are not guaranteed to fit)1× metallic solder cleaner with a 67 mm base4× helping hands (optional)HARDWARE FOR THE 3D PRINTS BOMLateral supports12× 4 mm wood screws (you can use 8; I used 12 because I was screwing into weak pallet wood)Front fan cover + filter4× 4 mm wood screws4× M4×30 bolts (M4×16 if yo