Posable Low-poly Pikachu

Added a moving head, tail and ears from the original. Added a Version with Ears that can be moved also.Added a Version 2, made the stud in the neck larger so there is less area for the head and neck to bond together. It is easier than the original version to free up the neck and head. This prints all at once, PLEASE read the printing details. Once the print is done, slowly loosen the tail up first. Then comes the hard part, breaking the neck area free. I use my scraper and slowly add pressure in the neck joint until I hear some cracking. I then work my scrapper around the whole neck area to free it up. It does take some practice.I have Decapitated Pikachu trying to free the neck.Print SettingsRafts: No Supports: No Resolution: .2mm Infill: 25% Notes: I recommend you just print up to the 9mm height and test the tail area to make sure it works. If it does not I would lower your extrusion multiplier until it does. Once the tail works the head should also.rnrnFor the Neck / Head joint you