Thingiverse
Pottery Tools - Trimming Chuck Base
door arperrin1217
16
Downloads
74
Likes
0
Makes
This is an updated base for the trimming chucks.
The dimensions are 275mmx125mm.
When placed diagonally on the print bed the dimensions are 213.5mmx213.5mm
The bat pin holes are 10mm in diamenter and are 254mm and 152mm apart on center.
If you measure from the outside of the pins this would be 264mm and 162mm respectively.
The bases are designed with a .15mm and .25mm tolerance between them and the chuck insert.
I'd suggest a test print of only the first layer to check fit with the insert and make sure the pin holes lineup.
The dimensions are 275mmx125mm.
When placed diagonally on the print bed the dimensions are 213.5mmx213.5mm
The bat pin holes are 10mm in diamenter and are 254mm and 152mm apart on center.
If you measure from the outside of the pins this would be 264mm and 162mm respectively.
The bases are designed with a .15mm and .25mm tolerance between them and the chuck insert.
I'd suggest a test print of only the first layer to check fit with the insert and make sure the pin holes lineup.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
