Pottery Trimming Spinner

## Pottery Trimming Spinner

Simple Pottery Trimming Spinner using:
- 22mm Bearing (608-2RS)
- M6 Screw from 15mm to 30mm (round head)
- M6 Nut (flat side to flat side no more than 10mm)

Assemble instructions:
1. Pass the screw through the bearing.
2. Insert the other end of the screw into the holder.
3. Secure the screw with a nut, using the nut-shaped hole to hold it in place.
4. Once it’s tight, press the bearing into the rotating face.


Tested with round screw head, it must have a low profile.