Power Hacksaw

This saw uses SCS8UU bearings and 8mm steel rods and a 25mm 12v 100rpm geared motor which i already had that's why i made this version. The base is 295x200x10mm (MDF) and am in the process of printing the other parts. This will take at least 50mm square items, the item shown in the vice is 4545 x 250mm.

Other parts needed are 2 x 8mm (340mm) Steel Rods, 2 x 6mm (200mm) threaded rod), 3 x SCS8UU bearings, 1 rocker switch (19.5 x 13mm Hole), 1 Roller switch (KW11 3Z), 1 Hex motor coupler (4mm shaft), 2 x 100mm x 72 mm hinges, 1 DC 2.1mm panel mount socket. 2 x 6mm couplers or wingnuts, 1 x 4mm x 20mm threaded spacer or wingnut.

2 x 3mm Bolts (8mm Button Flanged) [Motor]
8 x 4mm Nuts and 20mm long bolts to mount the motor and base.
16 x 4mm Nuts and 16mm long Countersunk bolts for the hinges.
2x 4mm Nyloc Nuts with 25mm long bolts to fix the steel rods + 2 washers.
For the Hacksaw blade, 1 x 4mm x 20mm bolt, 1 x 4mm x 12mm bolt, 1 x 4 x 50mm bolt,2 x nyloc nuts and 1 x 4mm washe