Powered Up Hub Mini Enclosure

A smaller inclosure for a Powered-up Hub. Primarily designed to keep the powered up hub in a smaller inclosure while being used with a 9V battery.

Print and Assembly Notes:
* Make sure to print flat sides down so that the studs and screw holes come out the correct size. Therefore: parts AB and C should be printed upside down and part D should be printed with no rotation.
* The top piece part D must be glued to piece C.
* Make sure to retain the original Torx 6 screws and green button.
* This project requires soldering. You will need to be capable of removing the original battery terminals and adding a new 9V clip.
* this forum post may be helpful in sourcing a 9V battery
https://www.eurobricks.com/forum/index.php?/forums/topic/183596-powered-up-lithium-diy/

Disassembly Notes:
* For information on how to disassemble the hub have a look at this teardown:
https://www.eurobricks.com/forum/index.php?/forums/topic/162288-powered-up-a-tear-down/
* You will need a Torx 6 screw