Thingiverse
Powerman 5000 Wall Plaque
0
Download
2
Likes
0
Makes
Wall plaque for the band Powerman 5000 based on one of their logos.
I used PrusaSlicer to slice the STL and add a color change at the correct height so that the lettering would be a different color from the base in a single print. There are countersunk screw holes in the corners of the wall plaque for easy mounting. I have included the svg file I created by tracing the logo and the scad file which adds the base and screw holes and uses a Google Font that was close enough to Powerman 5000 typical font.
If you are going to use the scad file and make changes to the STL then you will need to download the svg file and place it in the same folder as the scad file. You will also need to install Jomhuria font which is here: [Link to Google Fonts for Jomhuria](https://fonts.google.com/specimen/Jomhuria/tester?query=Jomhuria)
I used PrusaSlicer to slice the STL and add a color change at the correct height so that the lettering would be a different color from the base in a single print. There are countersunk screw holes in the corners of the wall plaque for easy mounting. I have included the svg file I created by tracing the logo and the scad file which adds the base and screw holes and uses a Google Font that was close enough to Powerman 5000 typical font.
If you are going to use the scad file and make changes to the STL then you will need to download the svg file and place it in the same folder as the scad file. You will also need to install Jomhuria font which is here: [Link to Google Fonts for Jomhuria](https://fonts.google.com/specimen/Jomhuria/tester?query=Jomhuria)
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
