Thingiverse
Powersupply case
by sk3lett
3
Downloads
2
Likes
0
Makes
My Design of a simple case for a 8A 5V (40W) powersupply.
-For assembling just put the powersupply in the case and lay the one cable left and the other right.
-Then fit a thick cable through the holes ,I would recommend soldering before you put the screws on :D.
-Now you can put your M3 screws through the bottom of the case and screw a nut on top I have also designed little holders for the nuts so you dont have to hold them while screwing from underneath.
Powersupply I used ( I thing there will also fit other in, just have to look simular) :
DE:
https://www.amazon.de/LED-Netzteil-MeanWell-LPV-60-5-Schaltnetzteil/dp/B00MWQF08C/ref=sr_1_17?__mk_de_DE=ÅMÅŽÕÑ&dchild=1&keywords=netzteil+8a&qid=1604957682&sr=8-17
USD:
https://www.amazon.com/-/de/dp/B00MEJEFJM/ref=sr_1_10?__mk_de_DE=ÅMÅŽÕÑ&dchild=1&keywords=led+power+supply+40+W+5V+8A%3B+MeanWell%2C+LPV-60-5%3B+switching+power+supply+%5Benergy+class+A%5D&qid=1604958036&sr=8-10
-For assembling just put the powersupply in the case and lay the one cable left and the other right.
-Then fit a thick cable through the holes ,I would recommend soldering before you put the screws on :D.
-Now you can put your M3 screws through the bottom of the case and screw a nut on top I have also designed little holders for the nuts so you dont have to hold them while screwing from underneath.
Powersupply I used ( I thing there will also fit other in, just have to look simular) :
DE:
https://www.amazon.de/LED-Netzteil-MeanWell-LPV-60-5-Schaltnetzteil/dp/B00MWQF08C/ref=sr_1_17?__mk_de_DE=ÅMÅŽÕÑ&dchild=1&keywords=netzteil+8a&qid=1604957682&sr=8-17
USD:
https://www.amazon.com/-/de/dp/B00MEJEFJM/ref=sr_1_10?__mk_de_DE=ÅMÅŽÕÑ&dchild=1&keywords=led+power+supply+40+W+5V+8A%3B+MeanWell%2C+LPV-60-5%3B+switching+power+supply+%5Benergy+class+A%5D&qid=1604958036&sr=8-10
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
