Thingiverse
Presence Sensor
von elik745i
1
Downloads
1
Likes
0
Makes
This is enclosure for standalone presence sensor LD2410b + wemos d1 mini, TP4056 charger board and battery from depleted vape.
More about project here:
https://www.drive2.ru/c/652697041356481849/
Case printed on STL printer, however FDM can be used too.
Components used:
1) Wemos D1 mini (LOLIN will work just fine too, case is convertible and reset pins are adapted for both boards)
2) LD2410B presence sensor - connected to RX/TX
3) 2EA 100K resistors
4) TP4056 charger board (Type-C)
5) 800mA battery from Vape
More about project here:
https://www.drive2.ru/c/652697041356481849/
Case printed on STL printer, however FDM can be used too.
Components used:
1) Wemos D1 mini (LOLIN will work just fine too, case is convertible and reset pins are adapted for both boards)
2) LD2410B presence sensor - connected to RX/TX
3) 2EA 100K resistors
4) TP4056 charger board (Type-C)
5) 800mA battery from Vape
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!