Press mold for microUSB type B like Г DOWN

This molds for molding microUSB type B (down) plug connetors.
I'm use hot glue with hot glue pistols for made this connectror. And i have best quality with layer thickness - 0,1 mm nozzle diameter - 0.5 mm
Maybe if u use 0.05 mm layer thickness u have better quality

Before pouring hot glue lubricate the form of motor oil or Vaseline. After pouring wait 30 min and open the form/

How to use these forms:
1 - First of all - print out, the thickness of the layer should be from 0.05 mm to 0.1 mm, the nozzle with a diameter of 0.5-0.4 mm (well, or a cnc drill with a metal cut)
2 - Solder the connector with wires according to the power scheme of your gadget
3 - Lubricate the mold with petroleum jelly or clean engine oil
4 - Insert the soldered connector into one part of the mold, cover the second
5 - Drag the rubber band for banknotes or tie it with thread so that it does not open
6 - Preheat the glue gun
7 - Using a gun to extrude the hot glue into the molds
8 - Allow to cool