Primal Rage - HueForge Print

This was requested by a lovely Patron and since it fit with my Retro Gaming print series, I figured why the hell not! It uses 6 colours so two AMS would be ideal, but you can just swap out two spools if you only have 1 AMS!The 3MF file has all necessary settings and swaps loaded in. If you do not use Bambu Studio, or want to use your own settings, please download the STL and follow the instructions: Print Instructions Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm The Model is 160x240mm in size You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 2mm and the Actual Depth is 2mm. Filaments Used:PLA Kingroon Black Transmission Distance: 0.4PLA CC3D Blue Gray Transmission Distance: 2.8PLA Chrominal Chestnut Brown Transmission Distance: 3.5PLA Kingroon White Transmission Distance: 5.8PLA CC3D Lemon Yellow Transmission Distance: 6.8PLA BambuLab Basic Red Transmission Distance: 5This print uses 6 unique filaments Swap Instructions