Thingiverse

Primer catcher without mounting ring

by lcecil

173 Downloads

70 Likes

3 Makes

Derived from 84047 Rock Chucker tray. Removed the ring that went around the vertical ram, so nothing interfers with finger access to the shellholder. Put a spent 22LR case in the small hole, to pin the holder in place. RCBS has a matching hole in the press frame, on the righthand side.

Prints flat on table, with support in the tube feed. Punch out with a screwdriver, then clear with a 3/8" drill bit (handheld!)

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

50 mm (Small)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Primer catcher without mounting ring?

Any FDM printer should handle Primer catcher without mounting ring just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Primer catcher without mounting ring need supports when printing?

Yes, Primer catcher without mounting ring will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Primer catcher without mounting ring available in?

Primer catcher without mounting ring is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Primer catcher without mounting ring free to download?

Yes, Primer catcher without mounting ring is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Primer catcher without mounting ring

Add to Collection