Primpape Pokemon Hueforge

Project: Primeape charges with lightning fury.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.64mm The Max allowed Thickness is 2.64mm and the Actual Thickness is 2.56mm #000000 PLA Basic Black Transmission Distance: 0.1 #00358e PLA Basic Blue Transmission Distance: 4 #ffffff PLA Basic Jade White Transmission Distance: 5.8 #814100 PLA Brown Transmission Distance: 2.8 #c00d1e PLA Basic Red Transmission Distance: 3.7 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #11 (0.96mm) swap to Jade White At layer #12 (1.04mm) swap to Brown At layer #16 (1.36mm) swap to Jade White At layer #17 (1.44mm) swap to Black At layer #18 (1.52mm) swap to Jade White At layer #26 (2.16mm) swap to Black At layer #27 (2.24mm) swap to Red At layer #29 (2.4mm) swap to Jade White for the rest. For single AMS users, s