Thingiverse
Primus Gas Cap - Easy Grip
by lukaswass
2
Downloads
5
Likes
0
Makes
**Designed to be printed with TPU.**
This is an improved cap for Primus and similar gas canisters.
It fits as good as the original but is a-lot easier to remove.
Also works really well with gloves!
Fits all standard Lindal valve canisters.
### Print settings
Filament: **[Prusament TPU A95](https://www.prusa3d.com/product/prusament-tpu-95a-lipstick-red-500g-nfc/)** (I recommend **TPU A95**, stiffer variants won't flex enough to remove easily)
Infill: **100%**
Layer height: **0.15mm**
Support: **Organic/tree** (optional, works good without support but the overhang may be a little stringy)
This is an improved cap for Primus and similar gas canisters.
It fits as good as the original but is a-lot easier to remove.
Also works really well with gloves!
Fits all standard Lindal valve canisters.
### Print settings
Filament: **[Prusament TPU A95](https://www.prusa3d.com/product/prusament-tpu-95a-lipstick-red-500g-nfc/)** (I recommend **TPU A95**, stiffer variants won't flex enough to remove easily)
Infill: **100%**
Layer height: **0.15mm**
Support: **Organic/tree** (optional, works good without support but the overhang may be a little stringy)
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
