MakerWorld

Test Models

Print in Place 3D Keychain

by Emvi 3D · Test Models

413 Downloads

111 Likes

383 Makes

Go to Model

Keychain with 3D logo in the middle, easy Print & a good Test for your Printer. Dont forget to scale it how you need :)

3d 3d logo chain easy easy print fun functional functionalprint key key chain print print in place ring scale scalemodel test test print

Category

Test Models

Source

MakerWorld

Published

07.10.2023

Updated

18.06.2026

What you need to print this: Beginner Medium confidence

Why?

print-in-place design · no supports

Support-free Print-in-place

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

50 mm (Small)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Print in Place 3D Keychain?

Any FDM printer should handle Print in Place 3D Keychain just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Print in Place 3D Keychain need supports when printing?

Nope — Print in Place 3D Keychain is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

What file format is Print in Place 3D Keychain available in?

Print in Place 3D Keychain is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Print in Place 3D Keychain free to download?

Yes, Print in Place 3D Keychain is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Print in Place 3D Keychain

Similar Models

Add to Collection