Print in Place FLEXI-Egg

by sdaendi · Decor

55 Downloads

21 Likes

22 Makes

You can print this egg for yourself, because it is very satisfying, or it is also perfect for a small gift for the kids at Easter.It only requires 20g of filament, so you can use any leftover piece and it prints in 1:20h, making it perfect as a small intermediate project. I recommend that you clean the printing plate well with isopropanol or a little soap before printing, as the model has many small contact surfaces and good printing board adhesion is essential.

Egg ams noams noegg fidget satisfying a1 A1MINI p1p p1s x1c small flexi flex flexible fidgettoy flexitoy easter easteregg easter2025

sdaendi also publishes on

17 additional models across 1 more platforms

Printables

17 models

♥ 7,815 ↓ 13,322 ⚒ 65

Frequently Asked Questions

Does Print in Place FLEXI-Egg need supports when printing?

Nope — Print in Place FLEXI-Egg is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

How long does it take to print Print in Place FLEXI-Egg?

According to the design notes, Print in Place FLEXI-Egg takes approximately 20 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Print in Place FLEXI-Egg available in?

Print in Place FLEXI-Egg is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Print in Place FLEXI-Egg free to download?

Yes, Print in Place FLEXI-Egg is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Print in Place FLEXI-Egg

Similar Models

Add to Collection