Print-in-Place WR16 Engine Model

This is the first ever print-in-place, supportless WR 16 engine model. This print is an accurate model of a WR engine (which is most notably used by the car manufacturer Bugatti), featuring a correct firing order of cylinders, the standard 90 deg V with 15 deg offsets for the secondary angle, and 4 valves per piston.Boost MeIf you like this model and/or want to support my work, consider boosting. Thank you!Please make sure you have good bed adhesion or use brim/glue or slow the first layer when printing this model since it has many small first layer surfaces. Also make sure you use a rigid, non-brittle filament for this print (Increasing walls will help boost strength). Assembly (It is functional without any changes, but in order to have a correct engine, some parts need to move) Step 1: Notice that the pistons that need to be moved have a larger gap on the bottom of the model (face on the print bed) and smaller gaps on the top. Red arrows show example pistons that need to be moved (St