Print-optimized Slingshot (PETG)

I found this excellent model on Printables, but wanted something more slim so i remixed the handle and made it solid (removed grip support and hole). I recommend printing the main body, clamps, and knob at 100% infill with at least 5 perimeter walls, using aligned rectilinear infill. This model only requires the following hardware:2x M4x16mm hex bolts2x M4 nuts2x M4 washers1x slingshot band (recommended 0.65 or 0.75 thickness, don't go crazy on printable slingshots) Print the following:1x “mainbody”2x clamp2x knob Once printed, all you need to do is:Insert the m4 bolts into the knobsPress fit the M4 nuts into the clampInsert 1 M4 washer onto each knob/bolt assemblyPush knob/bolt assembly though the top of each forkLoosely thread on clamp (nut side facing outwards)Clamp on slingshot band of choice Disclaimer & Warning: Use of 3D Printed SlingshotsBy using this 3D printed slingshot, you acknowledge and understand that these items may be prone to structural failure. Due to the nature