Print remove tool

Used a spatula to remove print parts but wanted something sharper and more compatible with hammers. This one has a slot for a utility knife blade, which is tilted so that the blade edge perfectly meets the print plate when lightly pushed from above. Also easily removes skirts etc 1st layer traces and glue from the print plate.

Use:
0. Push a utility knife blade into the slot. Use glue, if blade too loose, my current one is fine without glue.
1. Place the tool on the print plate, blade just touching the part to be removed.
2. Lightly hit the tool end with a hammer.
3. If the part didn't snap off, continue tapping with the hammer until it does.