Thingiverse

Printable Bed Leveling Feeler Gauge

by AlexFlamand

128 Downloads

75 Likes

0 Makes

This is a set of printable, labeled feeler gauges that can be used for leveling the bed of your printer. All printers eventually get out of level. These are meant to be printed *before* that happens so that you can properly distance the nozzle from the bed in a location without having to use a sheet of paper to estimate the distance, and without having to buy a set of feeler gauges. A few suggestions:

1. Only use these when the hotend is cold to prevent warping or damage to the gauge.

2. Only try to print these if you know 100% that your bed is level already.

3. Always verify the thickness of the gauges with a pair of calipers or a micrometer before using them.

alex flamand bed leveling calibration calibration test feeler gauge feeler gauges fully 3d printed fully printable printable printer calibration alex flamand bed leveling calibration calibration test feeler gauge feeler gauges fully 3d printed fully printable printable printer calibration

Source

Thingiverse

What you need to print this: Beginner Low confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format