Printable Spring with Manual Support

After several prototypes of making printable spring, I found this to be a nice approach with good quality and easy post processing.

###While editting the Fusion 360 file parameters, keep an eye on the last slot opening commands, because it might need adjustment.
###The spring deform slightly after repeated action. If you want better durability, increase the spring density by reducing the pitch.

###Standard printing procedure:
Loads the Spring 11x60.stl in slicer,
0.2 layer height, no support.
Print.

Load the coil and support separately if you want to set the wall thickness differently to save material.

Modelling and making video:
https://www.youtube.com/watch?v=zOVLPAkMcRE