Thingiverse
PrintBot Rhino
door BQEducacion
1.7k
Downloads
1.5k
Likes
11
Makes
The *PrintBot RHINO* is an educational robot that can push objects with its dozer and take part in "sumobots fights".
You can see it in action at : http://youtu.be/r0RgC5rzKug
The robot has been designed to attach components such as servos, LEDs, push buttons, a buzzer, and other electronics parts.
RhinoBot can be controlled via bluetooth using an android app or also, can operate autonomously.
##BOM
###_Printed parts:_
You will need to print the following parts:
- 1 x MainBody
- 2 x BigWheels
- 2 x SmallWheels
- 1 x DozerBlade
- 1 x BatteryHolder
- 2 x BezelWheels
###_Hardware:_
- 2 x Lego Technic Tread - Part - 680c01
or the printed ones in Flexible Filament (thingid:1238921)
- 9 x M3x10 screw
- 4 x M3x40 screw
- 1 x M3x16 screw
- 16 x M3 nut
- 1 x Velcro tape
- 8 x AAA batteries
###_Tools:_
- Allen hex key 2.5 Standard
- Glue
- Small screwdriver
###_Electronic Parts:_
- 1 x Freaduino UNO
You can see it in action at : http://youtu.be/r0RgC5rzKug
The robot has been designed to attach components such as servos, LEDs, push buttons, a buzzer, and other electronics parts.
RhinoBot can be controlled via bluetooth using an android app or also, can operate autonomously.
##BOM
###_Printed parts:_
You will need to print the following parts:
- 1 x MainBody
- 2 x BigWheels
- 2 x SmallWheels
- 1 x DozerBlade
- 1 x BatteryHolder
- 2 x BezelWheels
###_Hardware:_
- 2 x Lego Technic Tread - Part - 680c01
or the printed ones in Flexible Filament (thingid:1238921)
- 9 x M3x10 screw
- 4 x M3x40 screw
- 1 x M3x16 screw
- 16 x M3 nut
- 1 x Velcro tape
- 8 x AAA batteries
###_Tools:_
- Allen hex key 2.5 Standard
- Glue
- Small screwdriver
###_Electronic Parts:_
- 1 x Freaduino UNO
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
