Printer linear rod cleaning/lubing tool

Clean and lubricate the printer&#39;s linear steel rods in seconds. This tool is for use on 8mm linear rods using a microfiber cloth. For optimal results, please follow these steps: First remove the supports and brim:In the next step, gently sand down any remaining material after the support (you can use a Dremel or do it by hand) to achieve the smoothest possible surface:It should look something like this.Next, cut a piece of microfiber cloth measuring approximately 34 x 15 mm of thickness approximately 0,4mm.Insert one end of the microfibre cloth into the slots as follows.Pull the microfiber cloth inside and pull the other end out (see picture). The easiest way is to push the microfiber cloth using a thin flat object, such as a knife. Now you have a cleaning tool head as shown in the picture. You can trim the rest of the fibre cloth to look like this.<img src="https://makerworld.bblmw.com/makerworld/model/