Hook

Designed for style and strength, it's perfect for hanging coats, bags, towels, or keys, helmet etc.Settings for Strong PETG PrintsInitial Layer Speed: 15–20 mm/sOther Key Settings Printer & Material BasicsNozzle Temp: 240–250 °C (start at 245 °C and adjust if needed)Bed Temp: 75–85 °CCooling Fan: Off or max 20% (layer fan can weaken layer adhesion)Enclosure: Recommended for consistent temps (not mandatory for PETG, but helps)Layer & Wall SettingsLayer Height: 0.2 mm (or 0.28 mm for stronger/thicker layers)Wall Line Count: 3Wall Thickness: At least 2 – 3 mmTop/Bottom Layers: 5–6Top/Bottom Thickness: 1.6–2.5 mmInfillInfill Density: 90 - 100%Print SpeedPrint Speed: 30–45 mm/s (slower = stronger)Wall Speed: 25–30 mm/sInitial Layer Height: 0.24 mm (good bed adhesion)Z Hop When Retracted: OnRetraction Speed: 25–35 mm/sGenerate support : EnableSupport structure : Tree🔧 Pro Tips:Dry your filament – PETG absorbs moisture and it greatly reduces strength.Use a brim or raft if warping is an issue.For critical strength parts: consider increasing wall count and infill rather than relying on 100% infill alone.Turn off "Print Cooling" or keep it minimal for layer bonding.