Thingiverse
Printing nozzle wipe code gcode (Dremel D3 3D45 3D40 3D20)
di javajuice
38
Download
32
Likes
0
Makes
This is my gcode to do a nozzle wipe before printing using a Dremel printer. It is configured to start at the bottom left and do a filament wipe on the Y-axis up 80 mm (from -40 to 40). The starting and ending wipe positions can easily be modified.
To use this gcode, in Dremel DigiLab 3D Slicer go to Settings / Printer / Manage Printers. Click Machine Settings on your printer and place the wipe gcode after the Start Gcode text.
Tested on a Dremel 3D45.
See the screenshot and look at the left side of the buildplate to see the nozzle wipe result.
; wipe code
G92 E0
G0 F4000
G0 X-115 ; set wipe start x
G0 Y-40 ; set wipe start y
G0 Z1
G0 X-115 Y40 F1500 E25 ; set wipe stop x and y
G92 E0
To use this gcode, in Dremel DigiLab 3D Slicer go to Settings / Printer / Manage Printers. Click Machine Settings on your printer and place the wipe gcode after the Start Gcode text.
Tested on a Dremel 3D45.
See the screenshot and look at the left side of the buildplate to see the nozzle wipe result.
; wipe code
G92 E0
G0 F4000
G0 X-115 ; set wipe start x
G0 Y-40 ; set wipe start y
G0 Z1
G0 X-115 Y40 F1500 E25 ; set wipe stop x and y
G92 E0
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
