Printrbot Play C270 mount

NOTE: If using a modern (post 2019) slicing software, you'll need to scale this to 0.1% for it to be the correct size. The overall footprint should by 56mm x 97.2mm x 66mm tall

I designed this to use #6-32 machine screws/nuts because they are readily available in my area. The base portion can be mirrored in your slicer if you'd like to mount on the right side of the printer. The printer frame screws do not need to be completely removed to install the base. You will reuse the original pivot shaft from the Logitech C270.

I've got a wide angle lens on my C270, but it will still clear the print area of the Play. You will need to readjust the focus of the C270 with it mounted in this position.