Project KillFlip - A FlipperZero Mount for dBrand Project_Killswitch

Project KillFlip
====================

Attach your FlipperZero to your dBrand Project_Killswitch Steamdeck Case!

I created 4 Models with different features.
* Project_KillFlip-Standard.stl - FlipperZero Attachment
* Project_KillFlip-Standard-GPIO.stl - FlipperZero Attachment with GPIO/WiFi/DevBoard Slot
* Project_KillFlip-IR.stl - FlipperZero Attachment with 45 Degree IR Cutout
* Project_KillFlip-IR-GPIO.stl - FlipperZero Attachment with 45 Degree IR Cutout and GPIO/WiFi/DevBoard Slot

KillSwitch-Lock.stl is copied right from [Project Killswitch - Universal Mount](https://www.thingiverse.com/thing:5874435) needs to be printed then assembled to the plate on the case using two-part epoxy or superglue. The parts have 0.4mm of clearance to make room for the bonding agent.

The IR range with the IR Slot Models is reduced dramatically without direct line of sight to the LEDs but I wanted the ability to hold the steamdeck normal with IR reflecting out the back side.

GPIO Slot