Propane Tank Stand – 3D printable model from MakerWorld

MakerWorld

Other House Models

Propane Tank Stand

by Bergeron720 · Other House Models

77 Downloads

41 Likes

41 Makes

Go to Model

I designed this propane tank stand to prevent the bottom ring of a 20lb tank from digging into dirt or getting caked with mud when it's not attached to a camper hitch or BBQ. The wide base provides solid support and helps keep the tank level, reducing the risk of it sinking into soft ground. It’s shaped to match the curve of a standard propane tank bottom, allowing the tank to slide in easily while staying fully supported. This model has been updated to include drainage holes as per one users suggestion. I printed mine in PLA, but PETG or ASA may be better choices for outdoor use due to their higher heat resistance. Print time was approximately 4.5 hours, using 220 grams of filament.

barbecue bbq backyard camping rv camper tent smoker summer gas ring trailer accessory base gear outdoor

Category

Other House Models

Source

MakerWorld

Published

09.05.2025

Updated

30.04.2026

What you need to print this: Beginner Medium confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA, PETG, ASA

Min. bed size

50 mm (Small)

Est. print time

4.5 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Propane Tank Stand?

Any FDM printer should handle Propane Tank Stand just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

How long does it take to print Propane Tank Stand?

According to the design notes, Propane Tank Stand takes approximately 4.5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Propane Tank Stand available in?

Propane Tank Stand is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Propane Tank Stand free to download?

Yes, Propane Tank Stand is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

5 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL