Proper Twelve Whiskey Label

4 Color hueforge. Do not change the layer heights or substitute colors if you arent willing to change the look. These filaments were designed to be used as is, not to be substituted for other brands/colors. The file uploaded is designed for the A1 Mini, but can be enlarged for the other printers. Just adjust your size by grabbing a corner,.. and then unclick the “uniform scale” button and then put your Z height back to 100%. Then it will print correctly no matter how you scale it. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmYou may print at higher layer heights below the Min Depth of 0.88mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyTerra AshGrey Transmission Distance: 0.3 PLA BambuLab Matte Ash Grey Transmission Distance: 0.4 PLA BambuLab Basic Gold Transmission Distance: 2.7 PLA BambuLab Matte White Transmission Distance: 4.6 This print uses 4 unique filaments Swap Instructions: Start with AshGrey At layer #28 (1.24mm