Thingiverse

Prophet 600 LED Wheel Lights

by Antilo

0 Downloads

0 Likes

0 Makes

Do you wish your Prophet 600 wheels would light up? Well now they can!

Uses the original nut and bolt that centers the pitch wheel.

Requires 4x 5mm LEDs (red but any colour will do) and either a 750ohm 1/2W resistor or 2x 1.5k 1/4W resistors in parallel. This runs them at a combined 20mAh.

Wire to the +15V rail (yellow) and GND (black) on the wheels themselves.

Please don't do this yourself if you don't know what you're doing, don't blow up a nice old synth

600 LED Modulation wheel Pitch Wheel Prophet Prophet 600 Sequential Circuits 600 LED Modulation wheel Pitch Wheel Prophet Prophet 600 Sequential Circuits

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format