proxmark3 easy case | 5.8mm thick!

I made a poorly made pm3 case, but on the plus side, its tiny, at only 5.8mm!

## Parts

- **Proxmark3 easy**: [AliExpress Link](https://s.click.aliexpress.com/e/_oDWBnEu)
- **RDM6300 Module (only for the antenna)**: [AliExpress Link](https://s.click.aliexpress.com/e/_omlqxlI)
- **M2X8 screw**

*Note: Thease are referral links. If you purchase through it, I earn a commission at no extra cost to you.*


Instructions with images [here](https://icmt.cc/p/thin-pm3-case-with-minor-mods)
## Instrctions

- **Sand down thease things**
picture

- **Tape the area where the HF antenna is with tape**
not needed because the antenna thatll be on it isnt conductive, but good practice.
picture

- **Tape the antenna in place and solder it**
picture
picture

And thats it!, print and screw the case, no thread inserts are used, just dont overtighten it,
I will warn the model isnt perfect, i dont bother re-printing if something kinda works so i left it as is,
Heres a image of what i mean with it not being