'Prusa' Filament Roller

Filament Roller, this design uses 4x 626Z bearings and two carbon fibre tubes to join the sections. I originally design this using rolled carbon fibre tubes that I had spare as it looks far superior but yo can use the STLs to print your own tubes.

Mounts are 100% infill no raft, no support
Sides are 20% infill no raft, no support

I used superglue to hold everything together, this makes it incredibly rigid.

###If you want to use carbon Fibre
------------------------------------------
The larger tube is 15mm I/D , 16mm O/D, 97.60 mm long. (I/D & Length Important) x2
The smaller tube is 8mm I/D, 10mm O/D, 93.50 mm long. (O/D & Length important) x2

Optional Filament clamp
* There is an option of printing the smaller of the two filament clamps, you should only need one for the front. You should take one of the larger tubes and cut it down to 2x 45mm long tubes. Fix the clamp in the centre and use this at the front. I would suggest angling the entry hole up at 45 deg. Fi