Thingiverse
Prusa I3 Electronic Enclosure
por elmuchacho
5
Descargas
7
Likes
0
Makes
The mounting point on the box are specifically designed for that [frame](https://www.thingiverse.com/thing:3060281) This is not really a remix of the frame but it's the easiest way to create a relation between those 2 design.
The electronic box can be printed with 2 colors without a dual color capable 3d Printer or you can just print it in a single color.
Single Color
This is pretty simple just drop the STL (base and lid you don’t need the logo) in you slicer, print and voila
Dual color tips:
This is a bit more complicated only because it require you to be methodical in the process.
The tricks here is dead simple:
- slice the lid_logo and print -> don’t remove the print from the bed -> slice the the lid and print on top of the logo.
The * on the print settings are helpful to improve on the quality of the print depending on the slicer defined move. Also depending on slicer and your printer to have a crisp logo you might have to play with the extrusion rate, s
The electronic box can be printed with 2 colors without a dual color capable 3d Printer or you can just print it in a single color.
Single Color
This is pretty simple just drop the STL (base and lid you don’t need the logo) in you slicer, print and voila
Dual color tips:
This is a bit more complicated only because it require you to be methodical in the process.
The tricks here is dead simple:
- slice the lid_logo and print -> don’t remove the print from the bed -> slice the the lid and print on top of the logo.
The * on the print settings are helpful to improve on the quality of the print depending on the slicer defined move. Also depending on slicer and your printer to have a crisp logo you might have to play with the extrusion rate, s
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!